It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
This work presents a flexible cable-shaped supercapacitor based on carbon fibers (CFs) coated with graphene flakes (GFs) for wearable electronic applications. The CF bundles were adopted as base materials and the GFs were coated on the surface of CFs using a simple dipping method for the enhancement of the specific surface area and the higher conductivity of flexible electrodes. H2SO4 was mixed with poly(vinyl alcohol) (PVA) to form a gel electrolyte, which can prevent leakage. Polydimethylsiloxane (PDMS) was selected as a packaging material to fabricate the proposed flexible supercapacitor due to its flexibility and good thermal and chemical stability. From the electrochemical analysis, the fabricated device exhibited 15.099–6.492 mF/cm2 of specific capacitance and 2.097–0.902 µWh/cm2 of energy density in the range of 50–300 mV/s of scan rate. These values were about 1.9 times larger than the supercapacitor without being coated with the GFs. In addition, the specific capacitance showed small difference of 3.4% between straight and twisted positions, which assures the mechanical stability of the flexible cable-shaped supercapacitor.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details

1 Department of Electronic Engineering, Kwangwoon University, Seoul, Republic of Korea
2 Department of Electronic Engineering, Kwangwoon University, Seoul, Republic of Korea; School of Electrical Engineering, University of South China, Hengyang, Hunan, People’s Republic of China