It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Spur gear is the most important component which is used to transfer the power and it also transmits the motion among the machine parts between two parallel axis. The reason for causing failures in Spur gear are compressive stress, friction, bending stress, wear and tear etc. In this study the compressive stress and bending stress of a spur gear are calculated mathematically with the help of PSG DDB, and the spur gear model is simulated by using solid works software. The PSG DDB values and formulae's are used in the mathematical calculations and then compared with solid works analysis. The final out comes are checked by comparing those results and we choose a better material for our assumed data. (PSG DDB -PSG Design Data Book)
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Assistant Professor, Department of Mechanical Engineering, M. Kumarasamy College of Engineering, Karur, Tamil Nadu, India
2 UG Student, Department of Mechanical Engineering, M. Kumarasamy College of Engineering, Karur, Tamil Nadu, India